Timer (Switch-Off Delay); Control Light - hanseatic SY-103D1-E3-C25-900 Gebrauchsanleitung

2. In order to change the fan strength during
operation, repeat step 1 with the desired
fan strength.
3. To switch off the fan, press the button(12)
.
Please note!
Switching the fan off does not mean that
the appliance is switched off!

Timer (switch-off delay)

Your exhaust hood is equipped with a switch-
off delay, which allows you to set the device
so that it shuts off automatically after a se-
lected time as based on the fan strength se-
lected. Activate the switch-off delay with the
button (9) .
The fan must be on in order to activate the
switch-off delay.
(9) (11)
1. Touchthe button when the fan is (9)
running. The button(9)
bars of the fan display will begin to flash.
2. In order to adapt the switch-off delay,
touch the button (9)
approximately corresponds to the re-
quired switch-off delay. The correspond-
ing number of bars and the button (9)
will illuminate and flash for a few seconds.
The individual delay times are paired with
one fan strength each:
Delay period in min.,
Level (bars)
2
4
6
8
and the first few
in the area which
approx.
10
20
30
40
Operation
In order to switch off the switch-off delay,
touch the button(9)
Please note!
Switching the fan off does not mean that
the appliance is switched off!

Control light

Your exhaust hood is equipped with two LED
lights. The lighting can be switched on or off
independently of the fans.
The lighting is automatically switched on
when the appliance is switched on.
(10)
1. Press the button (10)
lighting.
2. Press the button (10)
the lighting.
Page 17
once again.
to switch off the
again to switch on