Nilfisk SW4000 Bedienungshandbuch Seite 95

SCHEDULED MAINTENANCE TABLE (Continues)
Procedure
Hopper dust filter check and cleaning ("C" method)
Main broom driving belt check and/or replacement
Hopper gasket integrity check
Lifted hopper sensor operation check/adjustment
Motor carbon brush check and/or replacement
Fuel valve filter cleaning (Petrol)
Engine paper air filter replacement
Spark plug replacement
Engine idle speed check/adjustment
Valve clearance check/adjustment
Hydraulic system oil change
Supply hose replacement (LPG)
Engine combustion chamber cleaning
Fuel hose check/replacement (Petrol)
(*) For the relevant procedure, refer to the Service Manual.
(1) Daily or after using the machine.
(2) Or before start-up.
(3) Or more frequently if the machine is used on slopes.
(4) Or more often in dusty areas.
(5) Or every 6 months.
(6) And after the first 20 running-in hours.
(7) Maintenance procedures to be performed by an authorised Honda dealer.
(8) Change the hydraulic system oil after 500 hours or every year.
03/2013
INSTRUCTIONS FOR USE
Upon
delivery
1464815000 - SW4000, FLOORTEC R 870
Every
Every 10 Every 50
100
hours hours
hours
Every 500 hours (7)
Every 2 years (7)
ENGLISH
Every
Every
200
year
hours
(4)
(*)
(*)
(*)
(*)
(*)
(*)
(7)
(*) (8)
(*)
21