Explanatory Diagram W 850 E; Preparation Of The Coating; Material; Measuring The Viscosity With The Viscosity Measuring Cup - WAGNER W 850 E Betriebsanleitung

1
13
12
2
44
3
1/2
11
1
Explanatory diagram
W 850 E
4
1/2 Air cap/nozzle
3 Union nut
4 Air hose
5 Spray gun
5
6 Material adjustment screw
6
7 Trigger
7 8 Container
9 Spray gun holder
10 Motor blower
11 Adjusting knob for the amount
8
of air and pressure
12 Mains cable
13 ON/OFF switch
9

Preparation of the coating

10

material

Information regarding a sprayable
dilution is normally not to be found
on the material tin.
Therefore, use the viscosity table
(viscosity = thickness of the coating
material) page 46.
Removing the viscosity
measuring cup and air hose from
the device (fig. 2)
Turn both fasteners (1) 1/4 rotation
to the left. Remove the device
cover, take out viscosity measuring
cup and air hose.
Replace device cover (1) and turn
fasteners 1/4 rotation to the right.
GB