4. Design and function
Pos.
Application
Remote settings
8
Display of the communication commands and parameters.
For further information, see chapter 6.4.7 "Application [Remote]".
Service settings
9
Display of all service-relevant settings.
For further information, see chapter 6.4.8 "Application [Service]".
Info display
To call all information on the CTR3000, including all connected multiplexer.
For further information, see chapter 6.4.9 "Application [Info]".
Menu button
24
Return to the application menu
4.5.1.2 Symbols of the status bar
Pos.
Symbol
23
Status bar (see user interface in chapter 4.5 "User interface, touchscreen")
The status bar is located at the top of the screen.
Left: Display of the selected function page
■
Middle: Display of the currently set time
■
Right: Display of the activated function
■
Symbol
The symbol lights up on:
Start screen activated
Home
Application [Settings] activated
Settings
Application [Probes] activated
Probes
Application [Scan] activated
Scan
Log
Application [Logger] activated
Logger
Cal
Application [Calibration] activated
Calibration
Application [Remote] activated
Remote
Application [Service] activated
Service
Application [Info] activated
Info
WIKA operating instructions, model CTR3000
EN
19