Responsibility Of The Operator - WIKA TG58SA Betriebsanleitung

3. Safety
Any use beyond or different to the intended use is considered as
improper use.
EN Do not use this instrument in safety or emergency shutdown devices.
3.4 Compliance with EHEDG conformity
For an EHEDG-compliant connection, sealings in accordance with the
current EHEDG policy document must be used.
Sealings for connections per ISO 2852, DIN 32676 and BS 4825 part 3
are, e.g., manufactured by Combifit International B.V.
A manufacturer of VARINLINE
GmbH.

3.5 Responsibility of the operator

The instrument is used in the industrial sector. The operator is therefore
responsible for legal obligations regarding safety at work.
The safety instructions within these operating instructions, as well as the
safety, accident prevention and environmental protection regulations for
the application area must be maintained.
The operator is obliged to maintain the product label in a legible
condition.
To ensure safe working on the instrument, the operating company must
ensure
that suitable first-aid equipment is available and aid is provided
■
whenever required.
that the operating personnel are regularly instructed in all topics
■
regarding work safety, first aid and environmental protection and know
the operating instructions and in particular, the safety instructions
contained therein.
that the instrument is suitable for the particular application in
■
accordance with its intended use.
8
sealings is, e.g., GEA Tuchenhagen
®
WIKA operating instructions model TG58SA