Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Commissioning, operation
Scan/Calibration view
The difference between these two views is the information bar at the bottom of the instrument. In this a difference for the
calibration view is displayed. The difference is the difference between the reference (probe marked as reference and listed
first) and the test item (all other channels), displayed in the unit of the test item.
The buttons and their behaviour are known from the home application.
Scan/Calibration view: 2 channels selected
Scan/Calibration view: 4 channels selected
Pressing again the application [Scan], during seeing the different views of the scan, guides into the application
[Scan] menu, where all settings can be done and the scan can be stopped. Please refer to chapter 6.4.4.1
"Configuring a scan".
WIKA operating instructions, model CTR3000
Scan/Calibration view: 3 channels selected
Scan/Calibration view: more than 4 channels selected
EN
45
Werbung
Kapitel
Inhaltsverzeichnis
