Application [Logger] - WIKA CTR3000 Betriebsanleitung

6. Commissioning, operation

6.4.5 Application [Logger]

The application [Logger] describes the function of this instrument that logs all data which is displayed on the Home or Scan
application. If a scan is active the actual channel will be logged. The different possible settings are explained in the following
chapters.
1. Press the button [Start].
⇒
Start a logger with the preferred settings (described below) starts.
⇒
The LOG appears in the status line, which shows that the logger is active.
2. Press the button [Stop].
⇒
The logger is stopped and the LOG disappears in the status line.
While the logger is active, please do not change the probe configuration, including plugging or unplugging of
SMART probes.
WIKA operating instructions, model CTR3000
EN
47