Grundfos SL1 Montage- Und Betriebsanleitung Seite 33

EC-type examination certificate No: KEMA 08ATEX0125X.
Notified body: KEMA Quality B.V. No 0344. Utrechtseweg 310, 6812 AR Arnhem, Netherlands.
Manufacturer: Grundfos Management A/S, Poul Due Jensens Vej 7, 8850 Bjerringbro, Denmark.
— Machinery Directive (2006/42/EC).
Standards used: EN 809:1998 + A1:2009, EN 60204-1:2006.
— Low Voltage Directive (2006/95/EC).
Applicable when rated power is lower than 2.2 kW.
Standards used: EN 60335-1:2002, EN 60335-2-41:2003.
— EMC Directive (2004/108/EC).
For sensor versions the following standards are used:
EN 55014-1:2006, EN 55014-2:1997.
— Construction Products Directive (89/106/EEC).
Standards used: EN 12050-1:2001, EN 12050-2:2000.
— ATEX Directive (94/9/EC).
Standards used: EN 60079-0:2012, EN 60079-1:2007,
EN 13463-1:2009, EN 13463-5:2011.
For sensor versions the following standard is also used:
EN 60079-18:2009.
Applies only to products intended for use in potentially explosive
environments, II 2G, equipped with the separate ATEX approval
plate and EC-type examination certificate. Further information, see
below.
This EC declaration of conformity is only valid when published as part of
the Grundfos installation and operating instructions (publication number
96771279 0414).
Tatabánya, 1st April 2014
Jannek Uldal Christensen
D&E Central Europe Manager
GRUNDFOS Manufacturing Ltd.
Sóstó Ipari Park, Holland fasor 15
8000 Székesfehérvár, Hungary
Person authorised to compile technical file and
empowered to sign the EC declaration of conformity.
33