Spare Parts/Accessories; Trouble Shooting - FLORABEST FLS 3000 B2 Originalbetriebsanleitung

GB IE

Spare parts/Accessories

Spare parts and accessories can be obtained at
If you do not have internet access, please contact the Service Centre (see "Service-Cen-
ter" page 18). Please have the order number mentioned below ready.
blower pipe ............................................................................................91102290
collection bag .........................................................................................91102291
auxiliary handle ......................................................................................91102292
connection element ..................................................................................91102293
switch ....................................................................................................91102294
Impeller wheel with blades .......................................................................91102295
protective cover of the suction intake .........................................................91102296
suction pipe ............................................................................................91102297
carrying strap .........................................................................................91102298

Trouble shooting

Problem Possible cause
No mains power supply
Worn out carbon brushes
Appliance
Motor faulty
won't start
On/Off switch (
The suction tubes (
ection bag (
tubes (
(
Internal loose contact
Intermittent
Power cable damaged
operation
On/Off switch (
Collection bag (
Weak or
no suction
Collection bag (
power/
Impeller, blower or suction pipe
throughput
(
Impeller does Foreign body blocking the impel-
ler
not move
16
www.grizzly-service.eu
4) defective
16) and coll-
14), and/or blower
9) and protective cover
7) are not correctly mounted.
4) defective
14) is full
14) is dirty
9/16) is clogged or blocked
Corrective action
Check the socket, cable, line, plug and
fuse and have them repaired by a qua-
lified electrician if necessary.
Send in to Service Centre for repair
See the section on „Initial start-up"
Send in to Service Centre for repair
Empty collection bag
Clean collection bag
see „Removal of clogging
and blockage"
Remove the blockage (see „Removal
of clogging and blockage")