Sony 3CCD Bedienungsanleitung Seite 25

PROTECT
You can protect the current user settings by setting
"PROTECT" to "ON."
To save user sets and protect them
1
Select user preset A or B as desired from "USER
PRESET".
2
Make any settings or adjustments using the PAGE 1 to
PAGE 4 menus.
3
Set "PROTECT" to "ON."
The flashing "P" appears in front of the displayed user
preset A or B. This indicates that the user preset is
protected.
Note that the following item can be changed even when a
user preset is protected.
• USER PRESET
• PROTECT
BAUD RATE
Changes the baud rate of the REMOTE connector to any of
9600, 4800, 2400 or 1200.
Use a baud rate of 9600 when an RM-C950 is connected.
TRIGGER PULSE
Selects the same polarity as the input signal for controlling
the memory or external trigger shutter.
Selection Polarity
Falling edge
Rising edge
IRIS MODE
Sets the iris mode.
Selection Function
AUTO To use the auto iris lens.
FIX To use the optical lens without the auto iris
function.
AE LEVEL
This item appears when IRIS MODE is set to AUTO.
The auto exposure focusing level can be adjusted within the
range from -31 to +31 by pressing the DATA UP or DATA
DOWN button.
Press the DATA UP and DATA DOWN buttons together to
reset the values to ±00.
25