Sony 3CCD Bedienungsanleitung Seite 20

Adjusting and Setting with Menus
Selection Function
ATW
Activates auto-tracing white balance. This mode is
suitable for when the light source changes. The white
balance is automatically adjusted as the color
temperature changes.
When WHIT.BAL is set to AWB or ATW, the "R Paint"
and "B Paint" values are displayed on the menu. Use
these for fine adjustment. Adjust these while looking
at the screen.
R Paint: Adjusts the red paint (-10 to +10)
B Paint: Adjusts the blue paint (-10 to +10)
Press the DATA UP and DATA DOWN buttons
together to reset the values ±00.
M. PEDESTAL
Normally set to ±00.
Adjusts the darkness level of the black part of the image.
Use this function to bring out details in heavily shaded
areas. Use of a waveform monitor will make the adjustment
easier.
The pedestal levels of the R, G, B output signals can be
adjusted simultaneously within the range from -99 to +99.
Adjusting direction Outline of the image
+
Lighter
−
Darker
Press the DATA UP and DATA DOWN buttons together to
reset the values to ±00.
20
GAMMA
Gamma compensation.
Selection Function
ON
Compensates the reproduction characteristics of the
screen to produce natural-tone images. Use this
setting for normal camera use.
OFF Outputs the video signal linearly from the CCD without
gamma compensation. Use this setting when you
want to produce images for image processing or
image analysis.
DETAIL
Enables and disabales adjustment of the sharpness of the
object outlines.
Selection Function
ON Adjustment of the sharpness of the object outlines
disabled.
OFF Does not enable the adjustment of the sharpness of
the object outlines.