Compressor Maintenance; Instructions Relative To Inspections And Maintenance Jobs - Blitz Monsun Fast Serie Betriebsanleitung

GB
7

Compressor maintenance

7.1

Instructions relative to inspections and maintenance jobs.

The table that follows summarises the periodic and preventative maintenance jobs required to
keep the compressor in an efficient operational state in time.
A brief description of the running hours after which the type of maintenance job is required.
The compressor has been especially designed to facilitate maintenance jobs by simply opening the
side panel with quick-release locks.
Weekly: it is advisable to inspect the compressor, paying special attention to oil leaks and scale
due to settled dust and oil.
Note!
In order to use the compressor in complete safety read the safety standards
given in section 1.3. before reading this section.
Before performing any jobs within the sound-proof cabinet, ensure that:
The main line switch is turned off (position "0")
The compressor is disconnected from the compressed air system
All the pressure has been released from the compressor and internal
pneumatic circuit.
If the compressor is used for more than 3000 hours/year the jobs indicated
herewith are to be performed more often.
84