Storing The Packed And Unpacked Compressor - Blitz Monsun Fast Serie Betriebsanleitung

GB
Using a forklift truck take the compressor as near as possible to the place where it is to be installed
then carefully remove the protective packing without damaging it, following the instructions below:
• Remove the packing 1, by sliding it away upwards.
• Unscrew screws 2 that block the feet that secure the compressor to the pallet.
Note!
Carefully ensure that the contents correspond with all written in the consignment documents.
Dispose of the packing in compliance with current standards in force in the country of installation.
Note!
3.3

Storing the packed and unpacked compressor

For the whole time that the compressor is not used before unpacking it, store it in a dry place at a
temperature between +5° C and + 40° C and sheltered away from weather.
For the whole time that the compressor is not used after unpacking it, while waiting to start it up or
due to production stoppages, place sheets over it to protect it from dust, which may settle on the
components.
The oil is to be replaced and the operational efficiency of the compressor is to be checked if it is not
used for long periods.
The compressor can be left on the packing pallet to make it easier to move.
The machine must be unpacked by qualified personnel using appropriate
tools and equipment.
64