Nozzles - hanseatic VUS30ASS50A Gebrauchsanleitung

Nozzles

The vacuum cleaner comes with
various nozzles designed for a
range of uses. Where required,
each nozzle can be attached to
the telescopic suction hose (7)
or the suction tube (2) before or
during vacuuming.
Floor nozzle/turbo brush
(14)
The floor nozzle/turbo brush is
fixed. You will work with the floor
nozzle/turbo brush (12)most of
the time as it is deigned for large,
flat surfaces.
The rotating turbo brush is pro-
pelled by the vacuum air flow. It
is particularly suitable for vacu-
uming hair and thread from rugs
and carpeted floors.
Best vacuuming results are
achieved when you adapt the ap-
pliance to the floor surface using
the selector button (4).
– For short-pile or smooth floors
such as needle felt, PVC, par-
quet or tiles:
Switch off the turbo brush:
Press selector button (4) until
(12)
the indicator light (14) goes
out.
– For long-pile rugs/carpets:
Switch on the turbo brush:
Press selector button (4) until
the indicator light (14) comes
on.
The selector button (4) can also
be readjusted during operation.
Parquet nozzle
(15)
The parquet nozzle end (15) of
the 3-in-1 tool (11) is suitable for
maintaining parquet and laminate
floors.
Appliance parts Page GB-11
(4)