Shutdown and storage
To secure the appliance, take the
following precautions:
• Pull the mains plug out of the
socket.
• Snap the vacuum body back
into the upright position, as
described in Section „Finishing
vacuuming" on page GB-15.
Shutdown and storage Page GB-19
• Wind the mains cord (9)around
the upper (5) and lower (10)
mains cord holders, and return
the upper (5)mains cord holder
to the starting position.
• Guide the suction hose (7)
around both the lower (24)
and upper (23) suction hose
holders, and insert the suction
hose hilt (20) into the park
holder (21).
(7)
(23)
(5)
(9)
(10)
(24)