hanseatic VUS30ASS50A Gebrauchsanleitung Seite 61

(40)
3. Lift the air blade wheel (40)
from the turbo brush housing.
4. Fit the new drive belt (43) on
the drive roller (44) in the turbo
brush housing.
Care and maintenance Page GB-27
5. Reinsert the air blade
(43)
6. Replace the protective cov-
(44)
(40)
wheel (40) into the turbo brush
housing, ensuring that the
drive belt (43) is guided over
the drive roller (45) on the air
blade wheel.
er (42) with the help of the 5
screws and the cross-slotted
screwdriver.
(45)
(43)