Elektro-Automatik PSI 9080-100 Bedienungsanleitung Seite 62

Using the power supply
Every unit displays the local actual values of voltage and power. There is no totals formation of the actual values of all con-
nected units. This can only be realised with the System Link Mode. See „8. System Link Mode" for details.
Example configuration of a serial connection of three 80V units (up to three 80V units in serial connection are allowed,
according to the safety provisions), with one PSI 9000 as master and PS 9000 as slave(s):
Example configuration of a serial connection of two 300V units. It is important, that the short connection between the
positive output of the one unit and the negative output of the other unit is grounded, either at the one or at the other unit!
Here too, only one PSI 9000 can be operated in combination with one PS 9000.
62
© 2006, Elektro-Automatik GmbH & Co. KG
Irrtümer und Änderungen vorbehalten
© 2007, Elektro-Automatik GmbH & Co. KG
EN