Replacing The Fuse; Technical Specifications; Accessories - EuroLite SPARK MASTER Bedienungsanleitung

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating. Before replacing
the fuse, unplug mains lead.
Procedure:
• Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.
• Step 2: Remove the old fuse from the fuse holder.
• Step 3: Install the new fuse in the fuse holder.
• Step 4: Replace the fuse holder in the housing.
Power supply:
Power consumption:
Fuse:
Output height:
Warm-up time:
DMX channels:
DMX connectors:
Dimensions (L x W x H):
Weight:
Wireless remote control:
Battery:
Specifications are subject to change without notice due to product improvements.
XLR connection:

Accessories

No. 51707810
No. 51707815
No. 31005142

TECHNICAL SPECIFICATIONS

230 V AC, 50 Hz
760 W
F 5 A
1-5 m
5 min
2
3-pin XLR
250 x 245 x 325 mm
10.8 kg
433 MHz
12 V, type A23
EUROLITE Powder for Spark Master
EUROLITE WRC-9 Wireless Remote Control
ROADINGER Flightcase 2x Spark Master with wheels
25 • EN