Jump Start; Machine Maintenance - Ransomes Parkway 3 Sicherheits-, Bedienungs- Und Wartungshandbuch

8.10 JUMP START CABLE (OPTION) __________________________________________
A jump start socket can be fitted to the machine. It is
located on the bulkhead plate behind the seat. Cable
4160780 allows the machine to be jump started without
having to to lift the seat plate.

8.11 MACHINE MAINTENANCE_______________________________________________

Other Regular Service.
• Verify proper operation of safety interlock switches (Seat switch, etc.)
• Ensure nuts and bolts remain tight.
• visually inspect for hydraulic leaks.
• Keep engine bay clear of debris.
• Keep tyre pressure at correct level. See section 4
• Follow the engine manufacturer's maintenance recommendations.
• If a label becomes worn or removed, see the LABELS section of this manual or the tractor Parts Manual for
replacement information.
NOTE: When washing machine with pressure spray washers or steam cleaners, avoid washing bearing areas
because cleaning solutions might penetrate bearing seals and cause premature bearing failure.
Storage
• Store petrol or diesel fuel in an approved container in a cool dry place.
• Keep the machine and fuel containers in a locked storage place to prevent tampering and to keep children
from playing with them.
• Do not store fuel or petrol/diesel fuel powered equipment in any closed area where heating appliances,
pilot lights or any sort of open flame is present.
• Before storing, allow the engine to cool, and drain fuel completely from fuel tanks and containers.
• Maximum safety and best mowing results can only be expected if the mower is maintained and operated
properly.
8 MAINTENANCE & LUBRICATION
CAUTION
Stop Engine & Remove the Starter Key Before
Pressure Washing
A
en-67