Datalogging Menu; Language Menu - Ransomes Parkway 3 Sicherheits-, Bedienungs- Und Wartungshandbuch

6.2J.11 DATALOGGING MENU____________________________________________
The last 50 "Faults" that the controller detects will be
recorded, once 50 faults are logged, the next fault
arising will overwrite the oldest fault.
This information will be retrieved using the service tool,
or can be seen on the errors page of the service menu.
The same method of navigating pages applies, the
errors will scroll with the latest error always appearing
at the top of the screen.
The fault / data logging function has three actions.
Each can contain a maximum of 50 faults. These are:
Inclinometer Records slopes greater than 22°.
Engine Records engine shut downs due to
overheat or loss of oil pressure.
Service Records hydraulic by-pas and
missed service intervals.
6.2J.12 LANGUAGE MENU _______________________________________________
On the languages selection page, upon entering the
page the tick will appear next to the currently selected
language. When the tick is moved up and down the
language does not change until button 4 is used to
select and store the language, at that point the title bar
i.e. 'Language Menu' will change to the newly selected
language.
The options will always be in the appropriate language
i.e. English, Deutsche, Francais, Danish, Swedish &
Dutch.
6 CONTROLS
12/05/2008
13/05/2008
18/05/2008
22/06/2008
22/06/2008
13/05/2008 @ 13:05
Max Temp - 110°C
Time above 100°C - 17 mins

Language Menu

English
Deutsch
Francais
Danish
Swedish
Dutch
en-37