A Starter Key Switch; B Throttle Control Lever; C Parking Brakes; D Hazard Warning Switch - Ransomes Parkway 3 Sicherheits-, Bedienungs- Und Wartungshandbuch

6 CONTROLS
6.2A STARTER KEY SWITCH __________________________________________
The starter key (A) must be turned clockwise to the 'start'
position to start the engine. After starting, the key must be
released and allowed to return automatically to the 'on'
position for normal running.
NOTE:The glow plugs will auto pre-heat depending on
the coolant temperature before cranking begins.
The visual display shows the glow plug symbol and
counts down to indicate auto pre-heat is operating.
6.2B THROTTLE CONTROL LEVER______________________________________
The lever must be moved away from the operator to
increase the engine speed and towards the operator to
decrease the engine speed.
NOTE: Engine must be used at full speed
6.2C PARKING BRAKES _______________________________________________
When the engine is running the Parking brake is applied by
depressing the switch.
When the engine is switched off or the operator leaves the
seat the parking brake is automatically applied.
To release the parking brake depress the rocker switch.
When the Parking Brake is on the parking symbol is shown
on the visual display.
DO NOT apply the brake when the machine is moving.
6.2D HAZARD WARNING SWITCH _______________________________________
Switches the hazard warning indicators on and off. The
red lens flashes when switched on.
en-28