Loctite EQ RC15 Bedienungsanleitung Seite 37

2 Description
2.4.2 Symbols for operating modes and functions
Fixed quantity operating mode is selected
(quantity program)
Operating Mode "Quantity".
Fixed dosing time operating mode is selected
(time program).
External control start/stop operating mode is
selected
("Cont-Mode" or "Continuous Operation").
Rotor spray activated – rotor spray not
activated.
Store all parameters and settings so that they
are secured against a power failure.
Apply settings and return to the previous
screen.
Switch to the screen for device settings
(Factory settings, pump calibration, display
contrast).
Reset device to the factory settings (after
confirmation prompt).
Calibrate the pump (move the rotor through
exactly 10 revolutions in order to be able to
measure the dosed volume).
Enable function product reservoir or product
syringe.
When the product syringe is activated the
capacity must also be set.
Adjust the contrast of the screen.
When replacing an empty syringe with a full,
the left button has to be pressed. Thus, the
controller knows that you are working with a
full product syringe. The adjustment is set to
FULL = 100%
The right button has the function of ESC that is back to its previous state.
37