eQ-3 BC Bedienungsanleitung Seite 33

sating for the different installation heights of the valves. If
the valve manufacturer can be identified from a logo on the
thermostat dial or a symbol on the valve, the appropriate
extension pin can simply be selected using the table op-
posite. If the manufacturer cannot be identified, the clea-
rance dimension of the valve can be determined instead.
No. Manufacturer
1 Other
2 Herz, MMA, Remagg
3 TA, Comap, Markaryds
4 SAM, Slovarm
To do this, press the valve pin all the way down (thus fully
closing the valve) and measure the height of the valve pin
in relation to the adapter's contact surface (D).
Symbols
D
33