Endress+Hauser Promag 50 Einbauanleitung Seite 12

EA00059D
8.5 Modifications to the product roots and extended order codes in
the CER database on ENGINE
For customers:
To ensure the device data are updated correctly in the Common Equipment Record
(database), please contact the Endress+Hauser service organization. Contact data
available at:
Link: http://www.addresses.endress.com
For service technicians only:
Obligatory instruction
Technical changes such as upgrades, changes to configurations at inputs and outputs or
modifications to Endress+Hauser flowmeters necessitate the modification of the product root
(e.g. 5W4B => 5W4C) and/or the extended order code or the order code of the affected
device. Changes of this kind therefore necessitate new nameplates that correctly display each
technical change to the specified device data. In addition, the service organization responsible
for implementing technical changes to devices must ensure that the changed device data are
modified accordingly in the Endress+Hauser CER database.
This modification is absolutely essential in ensuring that the correct device data are displayed
in the CER database on ENGINE. Future deliveries of spare parts, as well as follow-up orders
for new devices using modified order structures, are guaranteed to be correct.
The following options are available:
1. Modify the product root and/or extended order code directly in the CER database on
ENGINE. This must be carried out by a person from the service organization (SC) in question.
Administrator rights are required for this. For additional information about CER admin users,
please use the following link to clue.endress.com:
Link: http://clue.endress.com/display/wamwiki/CER+Admins
If you do not have administrator rights, please use the following link to clue.endress.com in
order to receive CER training. Once you have completed this training program, you will be
assigned admin status.
Link: http://clue.endress.com/display/wamwiki/CER+admin+functions
12 Endress+Hauser