Operation Of The Osd Menu - Renkforce 1505092 Bedienungsanleitung

11. Operation of the OSD menu

You may use the buttons on the screen/DVR for this as well as those on the IR remote control.
• Briefly push the "Menu" button (5) on the screen/DVR or the "MENU" button on the IR remote control. Then the
main menu is displayed.
• Briefly pushing the " " or " " button selects the submenus available within the OSD menus:
- "Camera setting"
- "System Setting"
- "System Info"
- "Playback"
- "Record Setting"
• Confirm selection of a submenu with the "
• Depending on the submenu, settings or values can be changed with the arrow buttons " ", " ", "
• Depending on function/menu, the setting must be confirmed with the "
• To switch one level back in the menu, or to leave the OSD menu entirely, briefly push the "Menu" button (5) on the
screen/DVR or the "MENU" button on the IR remote control (you may need to push it several times if the screen/
DVR is in a submenu).
" button.
" button to be accepted.
" or " ".
55