Submenu "System Setting; A) Function "Date & Time; B) Function "Video Out - Renkforce 1505092 Bedienungsanleitung

13. Submenu "System setting"

a) Function "Date & time"
Date and time must be set to be displayed accordingly in the recorded video. Only this way can you see clearly when,
for example, a person has entered the surveyed area.
Proceed as follows:
• Briefly push the "Menu" button (5) on the screen/DVR or the "MENU" button on the IR remote control. Then the
main menu is displayed.
• Use the " " or the " " button to select the submenu "System Setting" and then briefly push the "
• Use the " " or the " " button to select the function "Date & Time" and then briefly push the "
• Use the " " or the " " button to switch between the settings for year, month, date, hours, minutes and seconds.
• Modify the respective value selected using the "
quick adjustment.
• Confirm the setting by pushing the "
• The screen/DVR then switches back to the previous menu.
• To switch one menu level back or to leave the OSD menu, briefly push the "Menu" button (5) on the screen/DVR or
the "MENU" button on the IR remote control (you may need to push it several times).

b) Function "Video out"

The video standard of the AV output can be switched between PAL and NTSC.
Proceed as follows:
• Briefly push the "Menu" button (5) on the screen/DVR or the "MENU" button on the IR remote control. Then the
main menu is displayed.
• Use the " " or the " " button to select the submenu "System Setting" and then briefly push the "
• Use the " " or the " " button to select the function "Video Out" and then briefly push the "
• Use the " " or the " " button to select from among the settings "PANEL", "PAL" and "NTSC".
• Confirm the setting by pushing the "
If you select "PAL" or "NTSC", the screen/DVR will directly switch to AV output (with the video standard
chosen by you). The picture on the screen/DVR will go out.
If you select "PANEL", the video screen will appear on the internal display of the screen/DVR.
Use the "TV OUT" button (10) on the screen/DVR or the "AV" button on the IR remote control to manually
switch between the AV output and the display of the screen/DVR.
" or the "
" button briefly.
" button briefly.
" button. Keep the respective button pressed for
" button.
" button.
" button.
" button.
59