D) Function "File Section; E) Function "File Overwrite - Renkforce 1505092 Bedienungsanleitung

d) Function "File section"

Here, you can set how long the video files on the memory card are to be. If the recording continues for more than
the set time, the screen/DVR will set up several files (e.g. if you set 5 minutes, this will result in 12 files in total at a
recording duration of 1 hour).
Writing errors on the memory card or other causes will not cause the entire recording to be lost.
Proceed as follows:
• Briefly push the "Menu" button (5) on the screen/DVR or the "MENU" button on the IR remote control. Then the
main menu is displayed.
• Use the " " or the " " button to select the submenu "Record Setting" and then briefly push the "
• Use the " " or the " " button to select the function "File Section" and then briefly push the "
• Set the desired duration with the " " or the " " button (5, 10 or 15 minutes).
• Confirm the setting by pushing the "
• The screen/DVR then switches back to the previous menu.
• To switch one menu level back or to leave the OSD menu, briefly push the "Menu" button (5) on the screen/DVR or
the "MENU" button on the IR remote control (you may need to push it several times).

e) Function "File overwrite"

This function is used to pre-set what happens if the memory card used is full.
Proceed as follows:
• Briefly push the "Menu" button (5) on the screen/DVR or the "MENU" button on the IR remote control. Then the
main menu is displayed.
• Use the " " or the " " button to select the submenu "Record Setting" and then briefly push the "
• Use the " " or the " " button to select the function "File Overwrite" and then briefly push the "
• Use the " " or the " " button to switch between "YES" (overwrite) and "NO" (cancel recording).
"YES" = If the memory card is full, the respective oldest recording will automatically be overwritten
"NO" = If the memory card is full, recording is no longer possible
• Confirm the setting by pushing the "
• The screen/DVR then switches back to the previous menu.
• To switch one menu level back or to leave the OSD menu, briefly push the "Menu" button (5) on the screen/DVR or
the "MENU" button on the IR remote control (you may need to push it several times).
" button briefly.
" button briefly.
" button.
" button.
" button.
" button.
67