B) Function "Schedule Recording - Renkforce 1505092 Bedienungsanleitung

b) Function "Schedule recording"

The screen/DVR can automatically record at specific times or only on specific weekdays, e.g. on Tuesdays, 6 AM to
12 PM and 6 PM to 9 PM. Several times per day and different settings per radio camera are possible.
Proceed as follows:
• Briefly push the "Menu" button (5) on the screen/DVR or the "MENU" button on the IR remote control. Then the
main menu is displayed.
• Use the " " or the " " button to select the submenu "Record Setting" and then briefly push the "
• Use the " " or the " " button to select the function "Schedule Recording" and then briefly push the "
• The " " or the " " button can be used to display the already-present recording periods for the 7 weekdays.
• To set or change recording times, push the "
briefly push the " " button.
• Use the " " or the " " button to select the desired radio camera ("Cam1", "Cam2", "Cam3" or "Cam4") and then
briefly push the " " button. The selected radio camera is highlighted in colour.
You can also select more than one radio camera. The following programming of the recording periods then
applies to all selected radio cameras at the same time. This way, time-consuming programming of every
individual camera is not necessary.
• Use the " " or the " " button to get to the setting of the start and end time and the weekdays.
• Set the start and end times for the recording period with the "
pressed for quick adjustment.
Select the desired weekdays by first selecting the weekday with the " " or the " " button and then briefly pushing
the " " button. A selected weekday is marked in colour.
You can also select more than one weekday. The programming of the recording periods then applies to all
selected weekdays at the same time.
• In order to save the settings for the recording period, use the " " or the " " button to select the "SET" button and
then briefly push the "
• In order to delete the settings for the recording period, use the " " or the " " button to select the "DEL" button and
then briefly push the "
• To switch one menu level back or to leave the OSD menu, briefly push the "Menu" button (5) on the screen/DVR or
the "MENU" button on the IR remote control (you may need to push it several times).
If you want to program two periods for one day (e.g. 6 AM - 10 AM and 6 PM - 10 PM), program the period
6 AM - 10 AM first as described above. Then start programming again and set the period 6 PM - 10 PM.
" button.
" button.
" or the " " button; "Modify" will be highlighted in colour. Then
" or the " " buttons. Keep the respective button
" button.
" button.
65