C) Function "Camera Resolution - Renkforce 1505092 Bedienungsanleitung

Proceed as follows:
• Briefly push the "Menu" button (5) on the screen/DVR or the "MENU" button on the IR remote control. Then the
main menu is displayed.
• Use the " " or " " button to select the submenu "Camera setting" and then briefly push the "
• Use the " " or " " button to select the function "Camera On/Off" and then briefly push the "
• Use the " " or the "
• Switch the channel on ("ON") or off ("OFF") with the " " or the " " button.
• Confirm the setting by pushing the "
• The screen/DVR then switches back to the previous menu. If you want to switch off another unused channel,
proceed as described above.
• To switch one menu level back or to leave the OSD menu, briefly push the "Menu" button (5) on the screen/DVR or
the "MENU" button on the IR remote control (you may need to push it several times).

c) Function "Camera resolution"

Here, you can set the resolution at which the recordings are made on the memory card. You can choose between
"VGA" (640 x 480) and "HD" (1280 x 720).
Proceed as follows:
• Briefly push the "Menu" button (5) on the screen/DVR or the "MENU" button on the IR remote control. Then the
main menu is displayed.
• Use the " " or " " button to select the submenu "Camera setting" and then briefly push the "
• Use the " " or the " " button to select the function "Camera Resolution" and then briefly push the "
• Use the " " or the "
• Select the desired resolution for the video recording with the " " or the " " button.
"VGA" = Resolution 640 x 480
"HD" = Resolution 1280 x 720
VGA permits recordings of 30 frames/s, HD up to 20 frames/s. The HD resolution also requires more
memory, so that the maximum recording duration is shorter.
• Confirm the setting by pushing the "
• The screen/DVR then switches back to the previous menu. If you want to set the resolution for another channel,
proceed as described above.
• To switch one menu level back or to leave the OSD menu, briefly push the "Menu" button (5) on the screen/DVR or
the "MENU" button on the IR remote control (you may need to push it several times).
" button to select one of the four channels ("cam 1", "cam 2", "cam 3" or "cam 4").
" button briefly.
" button to select one of the four channels ("cam 1", "cam 2", "cam 3" or "cam 4").
" button briefly.
" button.
" button.
" button.
" button.
57