Selection Of Melody Call; Vox Mode - Midland G12 Bedienungsanleitung

Menu Function
1 Selection of the operational channel
2 Selection of melody call
3 Settings of internal VOX
4 Settings of external VOX
5 Selection of channels to be scanned
6 Selection of transmission power
7 Vibration alert
8 Dual Watch
9 Transmission lock when channel is busy
10 Compander
11 Timeout timer
12 Forced reception time

6. Selection of melody call

As described in par. 5.11, a brief pressing of the CALL/LOCK button
sends an audio call. To choose one of the 10 available melodies do
the following:
1) Press twice the MENU button. The display shows CA (CALL) on
the right and a flashing number (from 0 to 0) on the left which
Display
refers to the melody currently in use.
2) Press the + or – button until you have selected the desired
(Channel)
melody: during the selection each selected melody is played
through the speaker.
CA
3) Press the PTT button to escape or wait for a few seconds. The
I
device will go back to standby mode having memorised the
chosen setting.
E
2 If at step 2 you select number 0, you will disable the call function
(briefly pressing CALL/LOCK button will not carry out any
function).
Po
VIb

6.2 VOX Mode

With VOX (Voice Operated eXchange) you can transmit without
pressing any buttons: all you need to do is talk into the microphone
bLo
at a short distance. If you rest the radio on a surface therefore you
can operate entirely hands free with VOX.
CPd
Moreover, by clipping the device to your belt with the optional audio
accessories (e.g. headphones with integrated microphone) which
tot
connect to jacks SPK and MIC/CHG, you can operate hands free
even while you move around. This is the most suitable way for VOX
PtY
to work since your mouth will be at a constant distance from the
microphone.
You can enable/disable VOX and independently regulate its sensitivity
according to its use: with the optional accessories or whether you
use it by itself.
9