Symbols On The Display - Midland G12 Bedienungsanleitung

3.2 Symbols on the display

The liquid crystal display of your PMR446 transceiver constantly
displays the operating status of the device and the function currently
in use. Possible symbols and their setting are described below:
Symbol Meaning Description
Battery charge Shows remaining level of battery
level charge.
Signal strength During reception the level of
signal strength is shown on the
basis of the number of bars
displayed. During broadcast all
bars flash.
Radio channel When in standby, these three
/multifunction large digits show the channel
currently selected. During
programming they show
different parameters and their
values (e.g. = level of power
transmission).
Power Save It shows when power save is
active
8
Multifunction
indicator
Low power
transmission
Ref.
Keypad locked Keypad is locked.
5.3
VOX
5.6.b
Channel
scanning
5.5 Call vibrate
Dual watch
Timeout Timer
Programming
5.6.a
When in standby, the small
digits to the right of the display
show the CTCSS tone or DCS
code currently set (e.g. =
tone CTCSS Num. 16). During
transmission it shows different
parameters and their values
accordingly. For example
means ON (function is active)
and means OFF (function is
disabled).
Lower power transmission is
selected.
VOX function is active (Voice
Operated eXchange) - it enables
hands free use of your device.
Channel scanning is taking
place (automatic signal search)
on the preset channels.
Call vibration is active
Dual Watch (quick search of
signals on two channels) is
active.
Timeout Timer is active.
The device is in programming
mode.
5.7
5.9
5.10
6.2
6.3
6.4
6.5
6.8
7.1