En - Quick Start-Up Guide - ABB ACS580 Kurzanleitung Für Die Inbetriebnahme

EN – Quick start-up guide
This guide describes how to start-up the drive using the First start assistant on the
assistant control panel.
Start-up with the First start assistant on an assistant
control panel
Make sure that the installation work is complete. Make sure that cover of the drive and the
cable box, if included, are on place.
Check that the starting of the motor does not cause any danger. De-couple the
driven machine if there is a risk of damage in case of an incorrect direction of
rotation.
Hints on using the assistant control panel
The two commands at the bottom of the display
(Options and Menu in the figure on the right),
show the functions of the two softkeys
located below the display. The commands
assigned to the softkeys vary depending on the
context.
Use keys , ,
and/or change values depending on the active
view.
Key ? shows a context-sensitive help page.
For more information, see ACS-AP-x assistant
control panels user's manual (3AUA0000085685
[English]).
1 – First start assistant guided settings:
Language, date and time, and motor nominal values
Have the motor name plate data at hand.
Power up the drive.
The First start assistant guides you through the
first start-up.
The assistant begins automatically. Wait until the
control panel enters the view shown on the right.
Select the language you want to use by highlighting
it (if not already highlighted) and pressing
(OK).
Note: After you have selected the language, it
takes a few minutes to download the language file
to the control panel.
Safety
and
and to move the cursor
EN – Quick start-up guide 3
R0-
R4
EN
DA
DE
ES
FI
FR
IT
NL
PL
PT
RU
SV
TR
ZH