ABB ACS580 Kurzanleitung Für Die Inbetriebnahme Seite 8

8 EN – Quick start-up guide
Adjust the parameters according to your needs.
Select a parameter and, depending on the
parameter type, press
(Select) (or
When you change the settings, you also change
R0-
the use of the I/O signals in the drive. Make sure
R4
the actual I/O wiring and the use of I/O in the
control program match each other. You can check
the current I/O use in the I/O menu under the
Main menu.
After making the adjustments, go back to the
Primary settings menu by pressing
(Back).
EN
Select Ramps and press
DA
DE
ES
FI
Adjust the parameters according to your needs.
FR
Select a parameter and press
After making the adjustments, go back to the
IT
Primary settings menu by pressing
(Back).
NL
PL
PT
RU
Select Limits and press
SV
TR
ZH
(Edit) or press
).
2 – Additional settings:
(acceleration and deceleration times for the motor)
(Select) (or
2 – Additional settings:
(Select) (or
Ramps
).
(Edit).
Limits
).