ABB ACS580 Kurzanleitung Für Die Inbetriebnahme Seite 5

In an edit view:
• Use and
right.
• Use and
• Press (Save) to accept the new setting,
or press (Cancel) to go back to the
previous view without making changes.
To give the drive a name that will be shown at the
top, press .
If you do not want to change the default name
(ACS580), continue straight to the set-up of the
motor nominal values by pressing
For information on editing text, see ACS580
firmware manual (3AXD50000016097 [English]).
Refer to the motor nameplate for the following nominal value settings of the motor. Enter the
values exactly as shown on the motor nameplate.
Example of a nameplate of an induction (asynchronous) motor:
ABB Motors
3 motor
M2AA 200 MLA 4
IEC 200 M/L 55
Hz kW
V
690 Y 50 30
400 D 50 30
660 Y
50
30
380 D 30
50
50
415 D 30
440 D 35
60
Cat. no
3GAA 202 001 - ADA
6312/C3
Check that the motor data is correct. Values are
predefined on the basis of the drive size but you
should verify that they correspond to the motor.
Start with the motor type.
Motor nominal cosΦ and nominal torque are
optional.
Press (Next) to continue.
to move the cursor left and
to change the value.
(Next).
No
Ins.cl. F
IP 55
IA/IN t E/s
r/min A
cos
1475 32.5 0.83
56
1475 0.83
1470 34 0.83
1470 59 0.83
1475 54 0.83
1770 59 0.83
6210/C3 180
IEC 34-1
EN – Quick start-up guide 5
R0-
R4
EN
DA
DE
ES
FI
FR
IT
NL
PL
PT
RU
SV
TR
ZH