Uhf-304 Receiver - Omnitronic UHF Serie Bedienungsanleitung

3.3 UHF-304 Receiver

5 6 7 8
13
No. Element
1 Receiver unit 1
2 Receiver unit 2
3 Receiver unit 3
4 Receiver unit 4
5 Power switch
6 Infrared interface
7 SYNC button
8 Status indicators
9 Level control
10 LCD display
11 Press control
12 SET button
13 Power input
14 Antenna inputs
15 Mixed output
16 Channel output
1 2
9
14 15
Function
Press 2 seconds to switch the receiver on and off.
To synchronize receiver and microphone point the infrared interfaces
at a maximum distance of 20 cm from each other.
To synchronize receiver and microphone.
RF: Indicates an existing connection to the microphone.
AF: Lights up when an audio signal from the microphone is received.
Control for the audio signal of the respective channel at the rear
outputs.
Indicates group, channel and frequency.
To set the transmission channel.
To enter the setting menu.
Plug in the connection cable of the supplied power adapter here.
To connect the antennas provided.
Unbalanced 6.3 mm jack for the output of the master signal of all
channels. For connection to a microphone or line input of a mixer or
amplifier.
Balanced XLR outputs for the output signal from the respective
channel. For connection to balanced microphone inputs of a mixer or
amplifier.
3 4
16
17 • EN
10 11
14
12