Contents
1
2
3
4
5
Operation ....................................... 20
6
7
8
D00119770, version 1.0, publ. 04/10/2018
For product updates, documentation, software
and support please visit www.omnitronic.de.
You can find the latest version of this user
manual in the product's download section.
© 2018 OMNITRONIC. All rights reserved.
No part of this document may be reproduced in
any form without the written permission of the
copyright owner. The contents of this document
are subject to revision without notice due to
continued progress in methodology, design,
and manufacturing.
All trademarks mentioned herein are the
property of their respective owners.
1 Introduction
Welcome to Omnitronic! Thank you for choosing one of our
products.
This user manual will show you how to install and operate
the wireless microphone system. Users of this product are
recommended to carefully read all warnings in this manual
and on the unit in order to protect yourself and others from
damage.
Please save this document for future needs and pass it on
to further owners.
1.1 Product features
• UHF PLL microphone systems with 1, 2 or 4 channels
• Operation in the license-free frequency ranges 823-
832 MHz and 863-865 MHz
• 93 preset channels in 10 channel groups
• Operation range with line of sight approx. 50 meters
• Easy and error-free synchronization between receiver and
transmitter via infrared signal
• LCDs for group, frequency and channel
• LEDs for carrier and audio signal
• Volume control
• Balanced XLR output
• Unbalanced 6.3 mm jack
• Jack cable included
• Removable antennas (BNC connection)
• Operation of the receiver unit via supplied power unit
• Incl. mounting brackets for 483 mm rack installation
• Dynamic microphones with cardioid polar pattern and
LCD for battery capacity and frequency
• Operation of the microphone via 2 x 1.5 V batteries (type
AA), not included
• Matching pocket transmitter can be ordered separately
• License-free and approved in large parts of the EU
(please check on a country-by-country basis)
13 • EN