Fill The Water Tank And Insert The Water Filter - WMF 10 Bedienungsanleitung

Initial setup
2.3
>
To switch on the coffee pad machine, press the On-/Off-/C button.
As long as the water tank is empty, the illuminated cross flashes red.
Caution!
Possible damage to your coffee pad machine with unsuitable liquids!
Liquids other than drinking water can damage your coffee pad machine or result in clogging.
> Fill the water tank of your coffee pad machine only with clean, cold drinking water.
> Never fill the water tank with hot water, mineral water or milk.
>
Open the door to the water tank.
Removing the water
>
Tilt the water tank outwards until it snaps into the draining position.
tank
>
Then lift the water tank outwards.
>
Remove the cover and take out the accessories in the tank.
>
Rinse the water tank thoroughly with tap water.
7
Fill the water tank and insert the water filter