Applying The Descaling Program - WMF 10 Bedienungsanleitung

Caring for the coffee pad machine.
Caution!
Damage to the appliance from unsuitable descaling agents!
If you use acetic acid or acetic acid essence, materials in the appliance can be damaged by it. Citric acid
does not enable complete descaling. Warranty claims will be voided in case of damage that results from
using an unsuitable descaling agent or not following the descaling specifications.
> Therefore, use only the descaling agent recommended by us.
>
Handle the descaling agent carefully and ensure that no damage is caused to furniture or clothing.
5.5.4

Applying the descaling program

Your coffee pad machine has an automatic descaling program with a runtime of about 35 to 40 minutes.
>
Keep a collecting vessel with at least 1 to 1.2 litres volume ready, which fits under the spouts.
>
If required, remove the drip tray with the drip tray grid.
As soon as the descaling program starts to run, it can be interrupted in an emergency by pulling the
mains plug.
The appliance must be in the Off state.
Preparations
>
Remove the milk foamer and the coffee spout cassette.
>
Unscrew the red steam nozzle out of the steam outlet. For this purpose, use the hexagon spanner in
the handle of the milk foamer (see
Chapter "5.4.4 Steam nozzle" on page 32 ff.).
>
Remove the suction cap from the water tank.
GB
36