WMF 10 Bedienungsanleitung Seite 69

Initial setup
>
Press the cleaning button.
In the beginning, the pump is somewhat louder than usual. During rinsing, the number of rinsing
procedures required is determined electronically. If several rinsing procedures are necessary, they are
interrupted every 45 seconds. The cleaning button flashes blue again.
>
If required, empty the collecting vessel and fill up the tank and press the cleaning button again.
As soon as adequate rinsing has been carried out, steam is generated. The illuminated cross then glows
red. The water is heated.
>
Turn the locking knob to position .
GB
10