Operation; Inserting/Removing A Disc - Medion MD 80686 Anleitung

DVD-Porty MD 80686 D EN.book Seite 18 Montag, 30. Mai 2005 4:05 16
O
PERATION

Inserting/removing a disc

• Make sure that the device has power (see above).
• To switch on the device hold down the ON button on the main device for around
1.5 seconds. The LED on the device will light up blue.
• You can also switch on the device from standby mode (the device LED will light up
red) using the standby button on the remote control.
• Insert the disc with the written side to the front into the disc slot (for discs written on
one side).
• As soon as you have inserted the disc far enough the drive will pull in the disc auto-
matically.
• To eject the disc again press the OPEN button on the remote control or device. The
drive will eject the disc and you can pull it out.
• To switch off the device hold down the OFF button on the main device for around
1.5 seconds. The device LED will light up red (standby mode).
Playback
If a disc has been inserted playback starts automatically. If no disc has been inserted
the DVD player's standard image is displayed.
The screen shows the disc type (DVD, VCD, CD, MP3) and the relevant menu.
EN-18