Medion MD 80686 Anleitung Seite 37

DVD-Porty MD 80686 D EN.book Seite 9 Montag, 30. Mai 2005 4:05 16
("Converting from AV OUT to AV IN" p. 13.).
Hold down the button for around 1.5 seconds to switch the display off. Press the
button briefly to switch the display on again.
5 Press the + and – buttons to change the values for the various settings.
6 OPEN: Open and close disc compartment
Left side of the main device
1 PHONE: Socket for ear and head-
phones;
the loudspeaker switches itself off
when headphones are used.
Before putting on ear or headphones set the volume to minimum!
2VOLUME: Volume control for the device and headphones
3 VIDEO IN/OUT: Use this socket to send input and output signals to a device con-
nected via an AV cable (depending on whether "AV INPUT" or "AV OUTPUT" was
selected via the MODE button; see above).
4 AUDIO IN/OUT; OPTICAL OUT
Use this socket to send input and output signals to a device connected via an AV
cable (depending on whether "AV INPUT" or "AV OUTPUT" was selected via the
MODE button; see above).
The socket can also be used as an optical output to play audio signals on a 5.1
amplifier (The MODE button must also be set to "AV OUTPUT" for this to occur; see
above).
5 DC IN: Socket for the mains adapter supplied and the car adapter.
Right side of the main device
1 CD/DVD slot in the drive
2 LED: Flashes when the drive is working
EN
EN-9