Battery Operation - Medion MD 80686 Anleitung

DVD-Porty MD 80686 D EN.book Seite 5 Montag, 30. Mai 2005 4:05 16
Power connection
Only connect the mains adapter to a 230V ~ 50Hz power socket that is easy to reach
and is close to the place where you have set up the device. The power socket must
be freely accessible so that you can unplug the device quickly if necessary.
Never undertake your own repairs
If the plug, cable or device is damaged, immediately remove the plug
from the power supply.
Never try to open and/or repair the device yourself. There is a risk of
electric shock. If there is a defect contact our Service Centre or other sui-
table specialist workshop.
DVD player
The DVD player is a class 1 laser product. The device has a
safety system that prevents dangerous laser rays escaping from
the device during normal use. In order to avoid eye injuries, ne-
ver manipulate or damage the device's security system.
Cleaning the device
Only use a clean, soft cloth for cleaning. Never use cleaning solutions that could da-
mage the surface of the devices.

Battery operation

Remove the battery if you want to use mains power. If the battery is connected some
power still flows. This can charge it too strongly and make it unusable.
Store the battery in a dry location at a temperature between 15°C and 25°C.
Even if you normally power the device from the mains you should empty the battery
completely through normal use at least once per year.
CAUTION!
If you want to use a different battery, make sure it is the same type
(7.4V 4000mAh). The use of the wrong kinds of batteries may result in
an explosion!
EN
EN-5