EN
Mounting and removing the grinding disc
Do not use the machine without the
2
Mounting
Removing
Mounting
Removing
USE
switchand needs to be unlocked before
operation.
theon/offswitch.
will then jump to the 'off' position.
themechanism.
8
Hints for optimum use
for small workpieces.
guide the grinding disc.
the workpiece.
machine to come to a complete standstill
before putting the machine down.
CLEANING AND MAINTENANCE
Before cleaning and maintenance,
always switch off the machine and
remove dust and dirt from the ventilation slots.
Worn or damaged grinding discs must be
replaced immediately.
Only use sharp and undamaged grinding
as described in the section
as described in the section
Carbon brushes
must be replaced by the customer service
department of the manufacturer or a similarly
WARRANTY
Ferm