Ferm AGM1053 Übersetzung Der Orginalbetriebsanleitung Seite 6

EN
Securely mount the guard for maximum safety.
grinding disc as much as possible.
protective means, such as safety gloves,
safety shoes, etc. Risk of personal injury.
protective equipment. Risk of personal injury.
rotating grinding disc, your hands or arms may
come in contact with the grinding disc.
Risk of personal injury.
surfaces where the grinding disc may contact
grinding disc contacts a 'live' wire, the exposed
metal parts of the machine can also become
'live'. Risk of electric shock.
your side. Risk of personal injury.
a maximum grinding depth that exceeds the
maximum grinding depth of the grinding disc.
coolants. Risk of electric shock.
Asbestos is considered carcinogenic.
of more than 80%.
rotate for a short period after switching off the
disc to a standstill yourself.
a workbench before it has been switched off.
Risk of electric shock.
or twisted grinding disc, which causes the machine
to lift up and out of the workpiece towards the user.
the cut, the grinding disc jams and the machine is
disc is twisted in the cut, the back edge of the
grinding disc can dig into the top surface of the
6
workpiece, which causes the grinding disc to climb
out of the cut and jump back towards the user.
machine and/or incorrect operating procedures or
proper precautions:
Position your arms to resist kickback forces.
Position your body to either side of the grinding
disc, but not in line with the grinding disc.
kickback forces can be controlled by the user.
grinding disc does not become jammed.
Risk of kickback.
for any reason, release the on/off switch and
hold the machine motionless in the material
until the grinding disc comes to a complete
from the workpiece or pull the machine
backward while the grinding disc is in motion.
Risk of kickback.
Unsharpened or incorrectly mounted grinding
discs produce narrow cuts, which causes
excessive friction and kickback and increases
the risk of the grinding discs becoming jammed.
woodcarving blades for saw chains.
Risk of personal injury.
Always check that the voltage of the
power supply corresponds to the voltage
the mains plug is damaged.
the power rating of the machine with a minimum
thickness of 1.5 mm
cable reel, always fully unroll the cable.
damaged and needs replacing, it is important that
it is correctly destroyed and replaced by an
2
Ferm