Angle Grinder; Safety Warnings - Ferm AGM1053 Übersetzung Der Orginalbetriebsanleitung

ANGLE GRINDER

Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our philosophy
we also provide an excellent customer service,
backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.

SAFETY WARNINGS

WARNING
Read the enclosed safety warnings,
the additional safety warnings and
the instructions.
Failure to follow the safety warnings and
the instructions may result in electric
Keep the safety warnings and the
instructions for future reference.
The following symbols are used in the user
manual or on the product:
Immediately remove the mains plug from
the mains if the mains cable becomes
damaged and during cleaning and
Do not press the spindle lock button
Ferm
Do not dispose of the product in
The product is in accordance with the
applicable safety standards in the
grinder or cut-off machine. The machine is not
suitable for operations such as sanding, wire
brushing, polishing, etc. Risk of personal injury.
the manufacturer. Risk of personal injury.
which are bent, cracked, or otherwise
accessories is dropped, inspect the machine
replace the accessory.
vibrates strongly, immediately switch off the
machine, remove the mains plug from the
mains, and try to solve the problem.
grinding disc is larger than or the same as the
maximum speed of the machine. Refer to the
rating plate on the machine.
thickness and outside diameter. Refer to the
rating plate on the machine.
discs, spacers, tension nuts, etc. correspond
to the diameter of the spindle on the machine.
mount grinding discs with another spindle
diameter.
the application. For example: do not grind with
the side of a cut-off disc.
EN
5