Assembly; Operation; Switching On/Off - Parkside PNTSA 20-Li A1 Originalbetriebsanleitung

ashes, petrol, solvents, acids or
caustic solutions. Personal injury
could occur.
• Nozzles and suction tubes must
not reach head level whilst in
use. Personal injury could occur.
To avoid accidents and injuries from
electric shocks:
• Turn off the device and remove
the battery:
- when you are not using the
device,
- transporting it or leaving it un-
attended;
- when you are checking the de-
vice, cleaning it or removing
blockages;
- when you are carrying out
cleaning or maintenance work
or replacing accessories;
The following states how damage
to the appliance and possible injury
to people can be avoided:
• Ensure that the machine is cor-
rectly assembled and the ilters
are in the correct position.
• Do not use without the ilter. This
could damage the machine.
• Only use original spare parts
and accessories delivered and
recommended by our Service
Centre (see "Spare parts/Ac-
cessories"). The use of parts by
other manufacturers immediately
renders the guarantee void.
• Only have repairs carried out
at our authorised customer ser-
vice points.
• Observe the instructions for
cleaning and maintenance of
the machine.
• Store the appliance in a dry
place and out of reach of chil-
dren.
Warning! Observe the safety infor-
mation in the operating instructions
for your Parkside X 20 V Team series
rechargeable battery.

Assembly

1. Insert the paper ilter bag (19)
(see
2. Place the motor head (1) onto
the dirt container (6) and lock
it into place using the locking
clips (8).
3. Attach the suction hose (12)
and accessories.

Operation

Fully unwind the suction hose (
12) before commencing work.

Switching on/off

Switching on the vacuum:
On/off switch (
Switching off the vacuum:
On/off switch (
GB
):
3) in position "I".
3) in position "O".
IE
17