Assembly - Parkside PWD 25 A2 Originalbetriebsanleitung

turer, a customer service agent
of the same or a similarly quali-
fied person in order to prevent
hazards.
• Switch the machine off and pull
the plug under the following
circumstances:
- when you are not using the
device,
- transporting it or leaving it
unattended;
- when you are checking the
device, cleaning it or remov-
ing blockages;
- when you are carrying out
cleaning or maintenance
work or replacing accesso-
ries;
- when the power or extension
cable is damaged; after con-
tact with foreign bodies or in
case of abnormal vibration.
• Never use the mains lead to
pull the plug out of the socket
or to pull the appliance. Protect
the mains lead from heat, oil
and sharp edges.
• Make sure that the mains volt-
age corresponds with the infor-
mation on the rating plate.
• The device must only be con-
nected to a mains socket via a
residual-current circuit breaker
(RCD) with a rated leakage cur-
rent of not more than 30 mA.
The following states how damage
to the appliance and possible in-
jury to people can be avoided:
• Ensure that the machine is cor-
rectly assembled and the filters
are in the correct position.
• Do not use without the filter.
This could damage the ma-
chine.
• Only use Spare parts and ac-
cessories delivered and recom-
mended by our Service Centre
(see "Spare parts/Accesso-
ries"). The use of parts by other
manufacturers immediately ren-
ders the guarantee void.
• Only have repairs carried out
at our authorised customer ser-
vice points.
• Observe the instructions for
cleaning and maintenance of
the machine.
• Store the appliance in a dry
place and out of reach of chil-
dren.

Assembly

Pull out the mains plug.
Danger of electric shock.
The appliance is supplied with the
folded filter (
1. Place the 5 steering castors (7) onto the
mounts on the stainless steel container
(5).
2. Place the motor head (2) on the stain-
less steel container (5).
3. Lock the stainless steel container (5) us-
ing the fastening clips (10).
4. Fit the accessories:
- Connect the suction hose (16).
- Fit the handle (17)
- Fit the telescopic suction pipe (14).
(Press the knob on the telescopic suc-
tion pipe in the
separate to the desired length).
- Fit the desired nozzle (22/23/24).
Never vacuum without a filter!
To store the suction set during
breaks, push together the telescopic
GB IE
20) fitted.
direction and
21