Short Description Of The Kawe Examination Light; General Product Description; Operating The Kawe Examination Light; Switching The Light On/Off - KaWe Masterlight Gebrauchsanweisung

Symbol key:
Caution!
Important assembly instructions,
useful information and user tips
Temperature limit
Separate disposal of electric
and electronic devices
Complies with relevant EU guidelines
Heed the User's Manual
Alternating current
Bulb
Protective earth connection
Protection class II
Fuse
Manufacturer
Series number
SN
REF Product reference number
Non-ionizing radiation
2. SHORT DESCRIPTION OF THE
KaWe EXAMINATION LIGHT
Information about intended use: The KaWe examination lights
were developed to be used by doctors in hospitals or in clinics in order
to illuminate areas of patient's bodies during medical examinations.
Main function: The KaWe examination light serves to provide illu-
mination.

General product description

• This is a KaWe examination light as described in EN 60601-2-41,
which as individual luminaries, are not failsafe.
• The KaWe examination light is intended to aid in treatment and di-
agnosis.
• The KaWe examination light is used in areas used for medical rea-
sons (group 0, 1 and 2 according to DIN VDE 0100-710 and HD
60364-7-710).
• The lights are mounted on a stand.
• The lights are to be serviced every 2 years.
20

3. OPERATING THE KAWE EXAMINATION LIGHT

2 4

3.1 Switching the light ON/OFF

The KaWe examination light is turned OFF and ON using button 1 on
the control panel.

3.2 Brightness control

The KaWe examination lights are all equipped with a brightness con-
trol function. The lamp models offer brightness modulation between
50% and 100% allowing the brightness of the light to be selected as
required. By pressing button 2, the brightness can be reduced. But-
ton 3 increases the brightness. The selected intensity is visible on the
display 4.

3.3 Focussing (only 20W, focus)

The 20W KaWe examination lights have a light spot that can be fo-
cused, meaning they can be enlarged or made smaller as the situation
requires. To focus the light spot, turn the handle 5 on the light body
(see image).
7
5

3.4 Positioning

Use the handle 5/6 or both handlebars 7 to position the light body
as desired.
1
3
7
6