Technical Data; Photometric Data; Electrical Data; Electrical Installation Information - KaWe Masterlight Gebrauchsanweisung

6. TECHNICAL DATA

6.1 Photometric data

Central illumination intensity
at a distance of 1 meter
Light spot diameter d
10
Light spot diameter d
50
Residual illumination intensity
with one shutter
Residual illumination intensity
with two shutters
Residual illumination intensity
at the bottom of a normed tube
Residual illumination intensity at
the bottom of a normed tube and
one shutter
Residual illumination intensity at the
bottom of a normed tube and two
shutters
Illumination depth 20 %
Illumination depth 60 %
Colour rendering index R
a
Colour rendering index R
9
Max. irradiation intensity
in the field at a distance of 1.0 m
Max. irradiation intensity
in the field at a distance of 0.8 m
Focusable light spot size
Colour temperature (Kelvin)
Heat build-up near the head
Electronic brightness control
on the light body (standard)
Number of LEDs
Working lifespan of the LEDs
Work area
Diameter of the light body
Height adjustment limit
Note: The technical data are subject to certain deviations.
Due to production–related reasons, the actual values can
vary slightly from the above-named values. The values for R
can deviate by approx. ± 5%. The colour temperature values
can deviate by approx. ± 200K.

6.2 Electrical Data

20W,
20W
Focus
70,000 Lux 60,000 Lux

6.3 Electrical installation information

128 mm 135 mm
The KaWe examination light is exposed to a current peak when it is
65 mm 70 mm
switched on and is therefore equipped with a power adapter. The
0 % 0 %
adapter has a wide range input, an input voltage of 100 - 240V AC, 50
- 60Hz, and output voltage of 24V DC. If a changeover relay is required
46 % 56 %
for an existing on-site emergency power supply for the KaWe adapter,
this relay must be ordered separately from KaWe.
100 % 100 %
Warning! This light is a Protection Class I device. To avoid
the risk of electric shock, this unit must be connected to a
0 % 0 %
grounded electric outlet.
46 % 56 %

6.4 Weights

1750 mm 1750 mm
650 mm 600 mm
95 95

6.5 Environmental conditions

94 94
250 W/m 2 213 W/m 2
270 W/m 2 234 W/m 2
14-25 cm 17 cm
4300 K 4300 K
* for higher temperatures please contact us.
0.5° C 0.5° C
50 - 100 % 50 - 100 %
19 19
50,000 h 50,000 h
70-140 cm 70-140 cm
33 cm 33 cm
123 cm 123 cm
a
Power input
Operating voltage
Amperage
KaWe examination light
20W
20W, Focus
Temperature
Relative humidity
Air pressure
Temperature
Relative humidity
Air pressure
20W, Focus/20W
28 W
24 V DC
1.2 A
Weight
2.4 kg
2.4 kg
Operation
Min. Max.
+10° C +30° C*
30 % 75 %
700 hPa 1060 hPa
Transport/storage
Min. Max.
–10° C +50° C
20 % 90 %
700 hPa 1060 hPa
23