Maintenance Intervals; Maintenance Interval Table; Oiling The Saw Chain - FLORABEST FKS 2200 G4 Originalbetriebsanleitung

G B
I E N I

Maintenance intervals

Regularly carry out the maintenance oper-
ations listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.

Maintenance Interval Table

Machine part
Components of the chain brake Check, replace if required
Sprocket chain wheel (
Saw chain ( 5)
A
Saw chain ( 5)
A
Guide bar ( 4)
A
Guide bar ( 4)
A
Oil automatic system

Oiling the saw chain

Clean and oil the chain regularly.
In this way, you keep the chain
sharp and get optimum machine
performance. In case of damage
due to inadequate maintenance of
the saw chain, the guarantee claim
is invalid.
Remove the power plug and use
cut-protection gloves when you are
handling the chain or the chain
bar.
2 2
CY
Action
24) Check, replace if required
Check oil, regrind or re-
place if required
Clean and oil
Check, clean and oil
turn around
check and, where appropriate,
Before
every
• Oil the chain after cleaning, after 10
hours of use or at least once weekly,
• Before oiling, the chain bar must be
cleaned thoroughly, in particular the
teeth of the rail. Use a whisk and a dry
cloth for that.
• Oil the individual chain links with the
aid of an oil suction gun with pinpoint
tip (available in the specialist trade).
Place individual oil drops onto the ar-
ticulated links and onto the tooth tips of
the individual chain links.
After 10 After
hours of every
use operation use







